Pod LED Light Bar States
This guide describes the LED light bar colors and patterns displayed by the pod and explains what each state indicates.
Pattern | Meaning |
|---|---|
Solid | Steady light |
Blink | On/off flashing |
Breathe | Slow fade in and out |
Init | Startup animation |
Color | Hex Value |
|---|---|
White | #FFFFFF |
Blue | #008CFF |
Green | #00FF00 |
Purple | #A020F0 |
Red | #FF1A1A |
LED State | Description |
|---|---|
White, Init | The device is booting during the first few seconds after the pod service starts. |
White, Blink | The device is waiting for a network connection or is in Wi-Fi setup mode. |
Blue, Blink | The device is connecting to a Wi-Fi network. |
White, Blink | The device is connected to Wi-Fi but lacks internet connectivity or time synchronization. |
White, Blink | The attempt to connect to Wi-Fi failed. |
White, Blink | An internet connection was lost while the device was running. |
Display app LED states are evaluated in priority order. The first matching condition determines the LED state.
LED State | Description |
|---|---|
Red, Blink | The device is rebooting. This state overrides all other LED indications. |
White, Solid | The pairing or authorization screen is displayed, and the device has not yet been configured. |
Purple, Solid | Shared content is currently being displayed. |
Red, Breathe | The assignment screen is displayed, and no active plan is assigned. |
Green, Breathe | The assignment screen is displayed, and an active plan is assigned. |
LED State | Description |
|---|---|
Red, Solid | A newer firmware version is available. |
Green, Solid | HDMI-in persistent mode is enabled, and someone is sharing content. |
Purple, Solid | HDMI-in persistent mode is enabled, and no one is sharing content. |
Green, Solid | Digital signage is enabled, the signage URL is reachable, and someone is sharing content. |
Purple, Solid | Digital signage is enabled, the signage URL is reachable, and no one is sharing content. |
Red, Blink | Digital signage is enabled, but the signage URL cannot be reached, and no one is sharing content. |
Green, Solid | Someone is sharing content. |
Green, Breathe | The device is idle and ready to share. This is the default state. |
Red, Blink may indicate either that the device is rebooting or that the configured digital signage URL cannot be reached.
White, Blink is used for all network connectivity issues, including unavailable networks, failed Wi-Fi connections, and loss of internet connectivity.
After the pod service restarts, the display application re-applies its previous LED state approximately 10 seconds later.
Display app LED states apply only to Linux pods running the web version of the display application.