Solstice Gen3 Pod Safety and Compliance Statements
Find the following safety and compliance statements for Solstice Gen3 Pods below:
FCC (USA) Warning Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
To comply with FCC's RF radiation exposure limits for general population/uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.
Condition on Warning statements.
UKCA RER (United Kingdom) Regulations Compliance Statement
The SP8096 is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017 (SI 2017 No. 1206, as amended).
This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
A minimum separation distance 20cm is required.
Class A Equipment Warning: Operation of this equipment in a residential environment could cause radio interference.
Frequency band(s) in which the radio equipment operates and maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
- Bluetooth Classic: 2402 – 2480 MHz
- BLE: 2402 – 2480 MHz
- 2.4 GHz WIFI:
- 20 MHz BW: 2412 – 2472 MHz
- 40 MHz BW: 2422 – 2462 MHz
- 5 GHz WIFI:
- 20 MHz BW: 5180 – 5240 MHz, 5260 – 5320 MHz, 5500 – 5700 MHz
- 40 MHz BW: 5190 – 5230 MHz, 5270 – 5310 MHz, 5510 – 5670 MHz
- 80 MHz BW: 5210 MHz, 5290 MHz, 5530 – 5610 MHz
Transmit power / power range:
- Bluetooth Classic: 12.50 dBm EIRP
- BLE: 4.81 dBm EIRP
- 2.4 GHz WIFI:
- 20 MHz BW: 15.90 dBm EIRP
- 40 MHz BW: 15.93 dBm EIRP
- 5 GHz WIFI:
- 20 MHz BW: 15.84 dBm EIRP
- 40 MHz BW: 15.72 dBm EIRP
- 80 MHz BW: 15.41 dBm EIRP
NOM (Mexico)
La operación de este equipo está sujeta a las siguientes dos condiciones:
- es posible que este equipo o dispositivo no cause interferencia perjudicial y
- este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.