Gen4 Mini Safety and Compliance Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
To comply with FCC's RF radiation exposure limits for general population/uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.
Important
These products require a UL Listed power adapter or DC power source marked "L.P.S." or "Limited Power Source," rated for 12V DC, 2.0A minimum, and suitable for operation at a minimum ambient temperature of 35°C. Please refer to these specifications when selecting an appropriate adapter.
Gen4 Mini Safety Instructions
Gen4 Mini Instructions de Sécurité
1. | Product name: Mersive Gen4 Mini , Compact Wireless Collaboration Device |
Nom du produit : Mersive Gen4 Mini, Dispositif de Collaboration Sans Fil Compact | |
2. | Input rating: 12 VDC, 2.0 A |
Tension d'entrée : 12Vcc, 2,0A | |
3. | Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer, discard used batteries according to the manufacturer's instructions. |
Attention : Danger d'explosion en cas de remplacement incorrect de la batterie. Remplacer uniquement par une batterie du même type ou d'un type équivalent recommandé par le fabricant. Éliminez les batteries usagées conformément aux instructions du fabricant. | |
4. | This product is not intended for use by children (this product is not a toy). This equipment is not suitable for use in locations where children are likely to be present. |
Cet équipement ne doit pas être manipulé par des enfants (ce n’est pas un jouet) et ne doit pas être utilisé dans un endroit susceptible d’accueillir des enfants. | |
5. | This product is intended to be supplied by an UL certified limited power source (LPS) power supply for use at operation temperature 35 degree C minimum, output rated 12 VDC, 2A minimum, altitude 2000m. |
Ce produit doit être alimenté par une source d'alimentation limitée (LPS) certifiée UL pour une utilisation à une température de fonctionnement de 35°C, avec une sortie minimale de 12Vcc, 2A, et une altitude minimale de 2000 m. | |
6. | Altitude operation: 2000 m. |
Altitude de fonctionnement : 2000 m. | |
7. | Please follow manufacturer's instructions to fix the device to a surface with M4*5mm screws attached. |
Veuillez suivre les instructions du fabricant pour fixer l'appareil sur une surface à l'aide de vis M4*5 mm. |
