Solstice Conference Supported Peripherals

Solstice Conference brings wireless video conferencing to any Solstice-enabled room. Using a ‘Bring Your Own Meeting’ (BYOM) approach, any laptop-based video conferencing software is supported with a simple one-step start user experience. Solstice’s rich, multi-content onsite collaboration can now be shared to remote users with Solstice Conference.

With the introduction of Solstice Conference, USB peripherals can be connected directly to the Solstice Pod to create a new class of a video conferencing room system. When a laptop wirelessly connects to the Pod, these devices are presented to the host laptop as though they have been directly connected, supporting a simple, wireless conferencing experience.

Peripheral Types

Peripherals can include microphones, speakers, cameras, and composite devices that include one or more of these capabilities. The Pod supports both USB 2.0 and 3.0 devices. Multiple peripherals can be plugged into the Pod, including the use of a third-party USB hub.

Connectivity and Setup

The Solstice Pod supports a plug-and-play experience. No drivers or new software needs to be installed on the Pod itself. Simply connect supported devices to the USB 2.0/3.0 ports on the back of the Pod to enable users to wirelessly bridge to those devices on demand.

Connected USB devices are only supported when using the USB 2.0/3.0 ports on the back of the Pod. The USB-C port on the front of the Pod does not support any connected devices. Attempting to utilize the Pod's USB-C port may result in unexpected outcomes.

Power Considerations

Peripherals that contain a rechargeable battery are not recommended. These devices will attempt to charge their batteries via the USB connection to the Pod, which the Pod is not designed for. If the connected peripherals require more than 1.5 amps total power over USB, it should first be connected to a powered USB hub that is then plugged into the Pod, or to a separate power supply, so it does not draw power from the Pod.

Supported Room Audio and Video Peripherals

Solstice Conference supports plug-and-play USB devices such as room cameras and microphones. These devices must be connected to the Pod via USB 2.0 or 3.0. Compatible peripherals fall into two categories:

  • Certified Peripherals - These devices include other peripherals that have been tested by Mersive and are confirmed to work with Solstice Conference.

  • Community Verified - These devices have been tested and verified by Mersive partners or customers and are attested to have full support of the device’s functionality.

Certified Peripherals

The devices listed below have been tested and verified by Mersive to work with Solstice Conference and have full support of the device’s functionality unless noted otherwise. As a note, the following list is not a comprehensive list of all compatible peripherals, but contains those that have been tested and verified by Mersive.

Device Name Notes Firmware Tested

Avaya HC020



AVer Cam 340+

Use camera in Bulk mode.


AVer Cam 520



AVer Cam 520 Pro



AVer Cam 540



AVer VB342+ Soundbar



Avonic CM22



Avonic CM44



Biamp Devio



Biamp TesiraForte AVB VT4

Coming soon!


Bose Videobar VB1



Cisco Webex Room Kit Mini



Clear One Unite50



Crestron UC-SB-1-CAM

Huddly Go



Huddly IQ

Plugging the Pod into the Mersive provided power supply recommended, either in place of or in addition to PoE+.


Jabra Panacast

Audio for microphone is sped up when video is on. Requires USB power injector or powered hub.


Jabra Link 370



Jabra Speak 710



Jabra Speak 750



Jabra Speak 810



Konftel 20



Logitech Meetup



Logitech Rally



Logitech Rally Bar

Reported video issues when used with Teams.


Logitech BCC950



Logitech PTZ Pro 2



Logitech ConferenceCam Connect

Requires powered USB hub or power supply.


Logitech Brio



Lumens VC-B10U



Lyzco USB>3.5mm Audio Adapter



Meeting Owl



Meeting Owl Pro



Microsoft LifeCam HD-3000



Neets 4k Webcam



Neets Soundbar SB1

Requires converter.


Neets Soundbar SB2



Nureva HDL 200



Nureva HDL 300



Poly Studio



Poly Studio X30

Supported using USB 2.0 USB-C to USB-A cable; plug USB-C into Poly device and USB-A into Solstice Pod.


Poly Studio X50

Supported using USB 2.0 USB-C to USB-A cable; plug USB-C into Poly device and USB-A into Solstice Pod.


QSC Core 110f



QSC I/O-USB Bridge



QSC PTZ 12x72



QSC PTZ 20x60



Sennheiser SP20 Audio Puck



Sennheiser SP30T Audio Puck



Shure ANIUSB-Matrix



Shure IntelliMix P300

Supports all Shure Audio Ecosystem networked microphones including MXA310, MXA710, and MXA910.


Stem Audio Table 1



Ugreen USB>3.5mm Audio Adapter



Vaddio Conference Shot 10



Vaddio Huddle Shot



Yamaha Adecia



Yamaha YVC-200



Yamaha YVC-330



Yamaha YVC-1000



Community Verified

These devices have been tested and verified externally by Mersive partners or customers and are attested to have full support of the device’s functionality. Mersive does not guarantee these device's compatibility nor can we guarantee their continued compatibility in the future, or that these devices will be actively supported when issues arise.

Device Name Notes Firmware Tested

ABlue Yeti USB Microphone



Blackmagic Web Presenter



Logitech C920



Logitech C922



Logitech C925



Logitech C925e



Logitech C930e



Sennheiser TeamConnect Ceiling 2 Kit - Microphone



Shure MV51 Microphone



Poly Trio

Vaddio A/V Bridge Mini

Verified on Windows


Vaddio Conference Shot AV Table Mic

Verified on Windows


Vaddio EasyIP 10 Camera

Verified on Windows